Wipaire is most often known as being the leading designer and manufacturer of Wipline floats. In reality, Wipaire has been engineering and building the highest performing and most popular aircraft modifications since 1960. We offer a long list of the industry's finest performance enhancing modifications and factory upgrades for the 206.
The co-pilot door for the Cessna 206 adds an immense amount of safety and convenience for the front seat passengers of your aircraft by allowing a convenient third way of entering or exiting the aircraft.
This feature is especially desirable when docking on the right side of the aircraft in the case of seaplane operation, and it is also extremely valuable as a way to exit the aircraft in an emergency where the pilot door is jammed or blocked.
The door is manufactured from carbon reinforced composite material and utilizes Cessna manufactured hinges and latches to appear identical to the pilot door. An opera window is installed between the new door and the rear double doors. The door is comprised of an outer aluminum skin and a fiberglass composite inside, with an inner "Royalite", formed plastic panel.
Portions of your original interior are cut and added to the inside door panel to maintain the inside decor. An armrest and grab handle are also installed. The outside is painted to blend the new door into the fuselage so the outside looks factory original.
Wip Tips are a valuable and attractive modification to add to your Cessna 206. There are several improvements this will bring to your flying experience.
First, the Wip Tip extends the wings by 18 inches. By extending the wings you get increased performance of your aircraft. Our Wip Tips increase the rate of climb and reduce the take off and landing distances. If you have ever made a takeoff on a hot, muggy summer day, you know how critical the last two knots of airspeed are. Wip Tips make a big difference in helping you on your way. At the same time it will save on fuel cost between 1 and 2 percent.
It is also important to know our Wip Tips increase your flying stability at low speeds as well as increase safety margins in all phases of flight. Stall speeds are also significantly reduced. There are several other improvements this Wip Tip modification will bring to your flying experience which you can hear about when you call us at 651.451.1205
One of the most effective ways of enhancing the capability and performance of your 206 is to add an IO-550 engine and Hartzell or McCauley "Power Prop".
Wipaire was the pioneer in this modification, being the first to recognize its true potential while being able to use all 300+ horsepower continuously if desired one can realize significant gains in climb and cruise performance. Seaplane operation will notice the extra 150 to 175 pounds of additional thrust that the combination provides while promoting a "good neighbor" environment because of its significantly lower noise level.
This modification teamed with the Wipline 3450 float provide a 200 lb gross weight increase on most F and G model 206 aircraft. Call us today to learn more about this exciting product that is sure to enhance your investment and your total flying experience.
|Wipaire Co-Pilot Door Pricing - Read More - See The Video!|
|Wipaire Co-Pilot Door and Step||Installed $22,200|
|With Float Purchase||Installed $21,200|
|Co-Pilot Door Opening Window w/ Original Installation||
|Co-Pilot Door Opening Window||
|"Wip" Tips Wing Extensions - Read More - See the Video!|
|Cessna 206 - Pre 1973 (SN: U20601700 and down) - KT04A13-004||Installed $7,100
|Cessna 206 -1972 and After (SN: U20601701 and up) - KT04A13-003||Installed $7,100
|IO-550 Engine Upgrade Propeller & Kit|
|Hartzell Propeller and IO-550 Kit (Includes spinner assembly)||$15,000|
|Hartzell Propeller and spinner assembly, part number (PHC-C3YF-1RF/F8468A-6R)||$10,300|
|McCauley Propeller and IO-550 Kit (Includes spinner assembly)||Call for Price|
|McCauley Propeller/Long Hub (D3A34C402/90DFA-10)(Includes Spinner Assembly)||Call for Price|
|McCauley Propeller/Short Hub (D3A34C401/90DFA-10) (Includes Spinner Assembly)||Call for Price|
|IO-550 Kit Only (KT34A14-001) Cessna 206||$4,700|
|STC Only - No Kit or Engine (Paperwork only)||$2,300|
NOTE:Propeller Governor (with Core Exchange) $1,600
Replacement STC/Prints $350.00 Per Set
Excluded is the Engine itself: IO-550F For 206.
206 SPEC# 16B for 12 volt or 10B for 24 volt
|Flint Tip Tanks (FA3330)||$19,300 Installed
ALL SHIPPING COST WILL BE ASSUMED BY PURCHASER
Prices in US Dollars, FOB St. Paul, Minnesota, USA, and are subject to change without notice. Prices do not include taxes, duties or tariffs. They also may vary if custom work is required or requested.
Effective: January 1, 2013